R30 Smart Control Panel Operation Guide (II): Relay Information Configuration & Room Device-Scenario Import
This guide mainly explains two core operations: modifying relay names and room assignments and independently importing room devices and scenarios to a designated R30 small screen, ensuring the device accurately meets usage requirements.
I. Modify Relay Names and Room Assignments for R30 Small Screen
Operation Steps
Access the R30 Device Management Interface on the Large Screen
Swipe down the notification bar at the top of the large screen, tap Apps, find and launch the LiteSmart app.
Enter the device ID of the target R30 small screen (Device ID query path: Swipe down the notification bar on the R30 small screen → 「Settings」→「About Device」), then tap the corresponding device ID to enter the management page.
Edit Relay Names and Corresponding Rooms
After entering the management interface, 2 channels of relays will be displayed on the page. Tap the Edit icon next to any relay.
Enter a custom relay name, select the corresponding room for the relay, and tap Confirm to save the configuration after completion.
Refresh Configuration on the Large Screen
After modifying the relay information, be sure to tap the Refresh Device button in the lower left corner of the current page to ensure the modification command is sent and activated.
Synchronize Updated Information on the Small Screen
Swipe down the notification bar at the top of the target R30 small screen and tap the Refresh icon to synchronize and update the relay names and room assignments.
Notes
Ensure that the large screen and the R30 small screen have been configured for LAN connection before operation; unconnected devices cannot have their information modified.
Both steps of "refreshing the device on the large screen + synchronizing via refresh on the small screen" must be completed. Missing either step will result in the modified content failing to take effect.
II. Import Corresponding Room Devices and Scenarios to a Designated R30 Small Screen
When multiple R30 small screens are connected to the large screen, you can individually configure room devices and scenarios for a single device through the following steps to achieve precise management.
Operation Steps
Access the Management Page of the Target R30 Device on the Large Screen
Swipe down the notification bar at the top of the large screen, tap Apps, and launch the LiteSmart app.
Enter the device ID of the target R30 small screen (query path is the same as above), then tap the corresponding device ID to enter the dedicated management interface.
Select Room Devices to Be Imported
In the device management interface, tap the Select Room to Import option.
Select the configuration mode as needed: check 「All Devices in the House」 (default mode), or individually check the target room, then tap Confirm to complete the selection.
Configure Designated Scenarios
Return to the device management interface and tap the Scenario Configuration option.
Check the designated scenarios to be imported to the R30 small screen, and tap Confirm to save the scenario configuration.
Refresh Device and Synchronize Configuration on the Large Screen
After selecting the room and scenarios, tap the Refresh Device button in the lower left corner of the page to ensure the configuration command is synchronized to the target R30 small screen.
Synchronize Configuration Information on the Small Screen
Swipe down the notification bar at the top of the target R30 small screen, tap the Refresh icon, and wait for a moment to complete the synchronization of room device and scenario information configured on the large screen.